Upgrade Gui Application - Siemens POL8T2.40/STD Basic Documentation

5.4 Upgrade GUI application

Siemens
Smart Infrastructure
4. Connect Climatix touch panel to external power supply, and disconnect it from
the controller.
5. Switch on the Climatix touch panel.
6. The Climatix touch panel displays the following color bars to indicate the
upgrading is in process. Displaying other color bars, for example
Red/Green/Blue, indicates error status. To solve the problem, change a USB
stick and try again.
7. When upgrading process is finished, the Climatix touch panel restarts
automatically. It displays introduction screen for few minutes. Afterwards touch
panel enters Android mode.
8. Reset the DIP switches to position 00000 (normal operation mode).
9. Shut down the Climatix touch panel and switch it on again.
The upgraded firmware is available on the Climatix touch panel. The firmware
revision displays on the bottom right corner of the screen.
The Climatix touch panel can upgrade Graphical User Interface (GUI) application
directly on field without the configuration PC. Users can upgrade it to the latest GUI
application created with engineering software directly by using a USB stick.
Refer to HMI-TOOL online-help for further information about engineering software
functionalities.
1. Create your GUI application with HMI-TOOL.
2. Download the GUI application into a USB stick (files as hmi.hmz and
hmi_model.dat). Do not change the default file name, otherwise the touch panel
cannot recognize it.
3. Power on the Climatix touch panel.
4. Insert the USB stick into the Climatix touch panel.
5. Wait until a request for confirmation of GUI download appears.
6. Confirm the GUI download process.
7. After the upgrade process is completed, the Climatix touch panel restarts
automatically.
8. The Climatix touch panel runs new GUI application.
Operating the Climatix touch panel
Upgrade GUI application
A6V11348824_en--_a
5
21 | 30
2018-04-10