Chefman INSTACOFFEE MAX+ User Manual page 6

OPERATING INSTRUCTIONS
PRIMING THE INSTACOFFEE
Priming the unit before first use is important. It removes any dust or
debris that may have entered the unit during manufacturing and shipping.
1. Insert the empty capsule receptacle into the brew chamber.
2. Fill the water tank. Do not exceed 14 oz.
3. Plug in the InstaCoffee if necessary.
4. Place a large mug or travel cup on the base of the InstaCoffee
and press the brew button. Do not remove the mug until the brew
indicator light stops flashing and turns off.
7
OPERATING INSTRUCTIONS
HOW TO USE THE INSTACOFFEE
1. If not already plugged in, plug in unit. Ensure rubber trivet is set in
place on the InstaCoffee's base.
2. Press the lid release button to open the lid. CAUTION: When opening
the lid and handling the capsule receptacle, be mindful of two small,
sharp puncturing needles located above and below the capsule
receptacle that puncture the K-Cup
3. If using a K-Cup , you must also use the capsule receptacle. Place
®
the capsule receptacle in the brew chamber. The looped handle
should be positioned on the left. The word "front" and the arrow
below it (printed on the inner rim of the capsule receptacle) should
be positioned toward the front. (Do not use the capsule receptacle if
brewing with the reusable coffee filter).
4. If using a K-Cup , insert it into the capsule receptacle. Press on the
®
firmly until you hear it being punctured. NOTE: Always use
K-Cup ®
the removable capsule receptacle when brewing with K-Cups
if receptacle is not used, K-Cup
5. If using the reusable coffee filter, spoon desired amount of ground
coffee into the coffee filter. The filter can hold up to 15 grams of
ground coffee; do not exceed the max line on the filter. Gently
push the coffee filter's lid closed so it snaps into place. Place the
filled coffee filter into the brew chamber so that the word "front" is
facing the front of the unit.
® before use.
® may explode.
;
®
8