Using Axis Scanclient; Invoking A Scan From Your Computer - Canon AXIS 1650 User Manual

Network print & scan server

Table of Contents

Scanning with AXIS 1650

Using AXIS ScanClient

Connect to the

Scanner

Disconnect from the

Scanner

Note:

Start a Scan from

your Computer

1. Start AXIS ScanClient (Start | AXIS ScanClient). The client will search the

network for scanning devices. Mark the one you would like to use by

clicking on it in the list (you can also select a scanner by entering its IP

address). Click [Connect].

2. If the scanner is busy AXIS ScanClient will show who is using it, otherwise

you will be connected, as indicated on the message line.

Click [Help] to get information on how to connect and disconnect.

You end a scanning session by clicking [Disconnect] on the AXIS

ScanClient.

The message line will change to Disconnected.

The scanning session will automatically end and the channel will be

disconnected after 5 minutes of inactivity.

Connect to the scanner with AXIS ScanClient - see page 56 - and place

the object to be scanned on the scanner flatbed.

AXIS 1650 User's Manual

Table of Contents