Toyota Prius 2010 Repair Manual page 319

NOTICE:
Do not forcibly insert SST into the terminals of the connector when connecting.
SST: 09843-18040
(d) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
W2-8 (SIG2) - W2-2 (SGD2)
W2-12 (SVC2) - W2-2 (SGD2)
Text in Illustration
*1 Front Occupant Classification Sensor RH
*3 Front Seat Wire RH
Front view of wire harness connector
*5
(to Front Occupant Classification Sensor RH)
*7 Connector C
NG
REPLACE FRONT SEAT WIRE RH
OK
4. CHECK FRONT SEAT WIRE RH (SHORT)
2010 Toyota Prius
(a) Disconnect SST from connector C.
Condition
Always
Always
*2 Occupant Classification ECU
Front view of wire harness connector
*4
(to Occupant Classification ECU)
*6 Connector B
- -
Specified Condition
Below 1 Ω
Below 1 Ω
Repair Manual