Toyota Prius 2010 Repair Manual page 239

(2) Place at least 2 tires onto the tire to which the front passenger airbag assembly is tied. The top tire should
have a wheel installed.
NOTICE:
Do not place the SST connector under the tire because it could be damaged.
(f) Install SST.
(2) Move SST at least 10 m (32.8 ft.) away from the airbag tied down to the tire.
(g) Deploy the airbag.
(1) Connect the red clip of SST to the positive (+) battery terminal and the black clip of SST to the negative (-)
battery terminal.
(2) Check that no one is within a 10 m (32.8 ft.) radius of the tire to which the front passenger airbag assembly
is tied.
(3) Press the SST activation switch and deploy the airbag.
CAUTION:
2010 Toyota Prius
(3) Tie the tires together with the 2 wires.
CAUTION:
Make sure that the wires are tight. Looseness in the wires results in the
tires breaking loose when the airbag is deployed.
(1) Connect the SST connector.
Text in Illustration
*1 Front Passenger Airbag Assembly
*2 Battery
SST: 09082-00700
NOTICE:
To avoid damaging the SST connector or wire harness, do not lock the
secondary lock of the twin lock. Also, secure some slack for the SST wire
harness inside the tire.
Repair Manual