Campbell Hausfeld IN469403AV Operating Instructions And Parts List Manual page 15

Symptom
Pressure washer will not
spray detergent
Notes
Possible Cause(s)
1 . Nozzle not pushed up far enough
2 . Clog, kink, or hole in detergent
suction hose
3 . Hose length too long
4 . Lance not functioning properly
Corrective Action
1 . Push nozzle forward as far as it will go .
2 . If clean, unkink or replace hose .
3 . Use only hose length provided with initial purchase of
pressure washer . Detergent suction will not function if
more than once section of hose is attached to unit .
4 . Remove lance from gun . If detergent is dispensed
through gun, the lance must be replaced . If not
detergent is dispensed through gun, remove 1 inch
tapered detergent barb from pump . Clean the barb,
and make sure that ball and spring are properly
aligned with tapered portion of the spring facing the
ball . The ball should be on top of the spring .
15
Pressure Washer
www.chpower.com