Advertisement
2005 Matsushita Electric Industrial Co. Ltd.. All rights reserved.
Unauthorized copying and distribution is a violation of law.
1. Assembling and Disassembling
"ATTENTION SERVICER"
Some chassis components may have sharp edges. Be careful when disassembling and
servicing.
1. This section describes procedures for checking the operation of
the major printed circuit boards and replacing the main
components.
2. For reassembly after operation checks or replacement, reverse
the respective procedures.
Special reassembly procedures are described only when required.
3. Select items from the following index when checks or
replacement are required.
4. Refer to the Parts No. on the page of "Parts Location and
Replacement Parts List" (Section 5), if necessary.
Advertisement
