Catalytic Oven Ceiling; Assembly - AEG COMPETENCE B 4100 Operating Instructions Manual

Catalytic oven ceiling

The oven has a catalytic oven ceiling.
Catalytic liners are self cleaning and will destroy splashes of food and
fats while the oven is on. To aid this process and to ensure continued
good performance of the liners, we recommend you run the oven,
without food, once a week.
0 1. Empty the oven including the wire shelf support grids.
2. Set the temperature at 250 °C.
3. Switch off the oven after 1 hour.
Attention: Manual cleaning of the catalytic liners is not recommended!
1
Damage will occur if oven sprays or abrasives of any kind are used.
Slight discolouration of the catalytic surfaces may occur in time. This
3
does not affect the catalytic properties in any way.
Additonal and replacement catalytic panels are available as an optional
extra. Please refer to the chapter "Special accessories".

Assembly

Important: The surface of the catalysis sheets is prone to scratches!
1
Important: The grill heater element must not be folded down using
force. There is a risk it may be broken!
Operating Instructions
41