Oven Door Glass - AEG COMPETENCE B 4100 Operating Instructions Manual

Operating Instructions

Oven Door Glass

The oven door is fitted with two panes of glass, these are fitted one
behind the other. The inner pane can be removed for cleaning.
Warning: Please only perform the following steps on the oven door
1
when it has been removed from the oven! When the door is fitted, the
reduction in the weight of the door when the glass is removed could
lead to the door suddenly closing and creating a hazard.
Removing the Door Inner Glass
0 1. Remove the oven door and place
on a soft, level surface with the
handle downwards.
2. Take hold of the pane of glass at
the upper edge and slide it against
the spring pressure in the direction
of the oven door handle until it is
free at the base (1).
3. Lift the pane gently at the base
and remove (2).
Replacing the Inner Door Glass
1. Guide the pane of glass at an angle
0
from above into the door section
on the handle side (1).
2. Lower the pane of glass (2). Place
the pane, against the force of the
spring on handle side, in front of
the retaining section on the lower
edge of the door and slide it
under the retaining section.
The pane of glass must sit securely!
3. Refit the oven door.
44