Information Concerning Disposal; Disposal Of Packaging; Disposal Of Your Old Appliance; Installing The Appliance - Thermador T24UC925DS Use & Care Manual

Information concerning disposal

Disposal of packaging

The packaging protects your appliance from
damage during transit. All utilized materials are
environmentally safe and recyclable. Please help
us by disposing of
environmentally friendly manner. Please ask your
dealer or your local authority about current means
of disposal.

Disposal of your old appliance

Old appliances are not worthless rubbish! Valuable
raw materials can be reclaimed by recycling old
appliances.
WARNING:
1. Pull out the power plug.
2. Cut off the power cord and discard with
the power plug.
3. Remove the drawers from the appliance.
4. Do not allow children to play with the
appliance once it has spent its useful
life. Danger of suffocation!
Refrigerators contain refrigerant and gases in the
insulation. Refrigerant and gases must be recycled
by professionals. Ensure that tubing of the
refrigerant circuit is not damaged prior to proper
disposal.

Installing the appliance

For detailed installation instructions, please
refer to the Installation Guide provided with the
appliance.
Have a qualified technician install and connect the
appliance according to the enclosed installation
instructions.
NOTE: For detailed installation instructions,
relevant measurements and information, please,
see the Installation Guide provided with this
appliance.
the packaging in an
WARNING:
Do not install this appliance:
- Outdoors
- In an environment with dripping water
- In rooms where there is a risk of frost
It is recommended that a separate circuit serving only your
refrigerator be provided. Use an outlet that cannot be turned off
by a switch. Do not use an extension cord.

Transporting

The appliance is heavy and must be handled with caution
during transportation and installation. Because of the weight
and dimensions of the appliance, at least two persons are
necessary to move the appliance into position securely and
avoid injuries to people or damage to the appliance.
WARNING:
While handling or moving the appliance avoid any
damaging to the tubing, risk of refrigerant leakage.

Installation location

A dry, well ventilated room is suitable as an installation
location. The installation location should not be exposed to
direct sunlight and not placed near a heat source, e.g. a
cooker, radiator, etc.
If installation next to a heat source is unavoidable, use a
suitable insulating plate or observe the following minimum
distance from the heat source:
▪ To electric or gas cookers 1¼" (3 cm).
▪
To an oil or coal-fired cooker 11
The floor of the installation location must not give way; if
required, reinforce floor. The appliance must be upright and
level to function correctly.
If the appliance seems unsteady there are 4 leveling legs that
can be adjusted to your preference.

Ventilation

The refrigeration unit is ventilated only at the Toe-Kick in
the base. Never cover that area or place anything in front of
it. Otherwise the refrigeration cooling performance will be
affected and the unit must work harder increasing power
consumption.
13 " (30cm).
/
16
Page | 5