Subscribe to Our Youtube Channel
Related Manuals for Defender Guard Pro
Summary of Contents for Defender Guard Pro
- Page 1 GUARD PRO QUICK START GUIDE ATTENTION For Returns or Support you MUST contact DefenderCameras.com/Support...
- Page 2 NEED HELP? PLEASE VISIT DefenderCameras.com/Support Open your camera & scan this QR code for access to the Defender Guard PRO Support Center...
-
Page 3: What's Included
WHAT’S INCLUDED Guard Pro Camera with Camera Power Supply (10 ft) pre-installed Micro SD Card IMPORTANT: The Camera Power Supply is NOT waterproof. Camera Power Camera Mounting Extension (25 ft) Hardware Window Warning Drilling Template Sticker LIFETIME Customer Support Ethernet... - Page 4 FIRST, SOME LEARNING Important: Guard Pro Wi-Fi Camera will only work on 2.4 GHz Wi-Fi network and is not compatible with 5 GHz networks. LED Indicator Spot Light Wi-Fi Antenna Lens Built-in Mic Reset Button Micro SD Card Slot Ethernet Cable...
-
Page 5: Let's Get Started
LET’S GET STARTED 1. Download the App Defender Guard Download the app and follow the steps to create an account. An email account is required for verification. DO NOT DOWNLOAD 2. Plug-In Your Camera to Power On Before connecting your camera to the App, wait 60 seconds for the LED indicator light to flash green. -
Page 6: Setting Up Your Camera
Tap + to add your camera, Scan the QR Code on the then tap Scan QR code. camera and tap “Next” to Guard PRO Proceed. Note: If your mobile device We recommend to save the cannot scan the QR code, tap QR code image in case the QR “Add Manually”... - Page 7 Select the Wi-Fi network you Enter your Wi-Fi Network password then tap “Next” want to connect your camera with. The Wi-Fi network list here only shows 2.4 GHz. Note: If your Wi-Fi network is Note: Make sure your phone not listed here, please refresh is connected to the same the page.
- Page 8 Make sure 2.5 m there is a nearby power outlet. (8 ft) Tip: Your Guard Pro Camera comes with a 25ft. extension cable, giving you 35ft. to mount your IMPORTANT: The Camera Power Supply is camera from the power outlet.
-
Page 9: Using The App
USING THE APP Get To Know Your Home Screen Add a Camera Do Not Disturb View all Paired Cameras Camera Name Device Settings Live View Back Door Device Sequencing Home Screen Account Settings Notifications Menu Need Help? Visit DefenderCameras.com/support... - Page 10 See It All With Live View Device Settings Share Device Live Stream Live Stream Tool Bar View Recorded Footage Record a video to Save a snapshot to your phone/tablet your phone/tablet (View or Share via (View or Share via Account Settings > Account Settings >...
-
Page 11: Setting Up Notifications
Setting Up Notifications To access Notifications, navigate to the home screen, tap (• •), and select Message Settings. From here you can enable the notifications you wish to receive. *Repeat for each camera. Need Help? Visit DefenderCameras.com/support... -
Page 12: Setting Up Motion Detection
Setting Up Motion Detection To access Detection Settings, navigate to the home screen, tap (• •), select Device Details and then Detection *Repeat for each camera. Back Door If both Motion Detection and Human Detection are enabled, you will only receive the push notifications about Human activity while the motion clips will still be recorded. - Page 13 Detection Region Setting To access Detection Region Settings, from the home screen, tap (• •), select Device Details > Detection > Detection Region Settings *Repeat for each camera. Tap (or drag) the grid to set your motion detection area. By default, regions highlighted in orange will detect motion.
-
Page 14: Recording Setup
Recording Setup To access Continuous Recording settings, from the home screen, tap (• •), select Device Details > Local Storage Rule > General Record Storage *Repeat for each camera. Camera video will be continuously stored after enabled. Note: Once your SD card is full, older footage will be overwritten. - Page 15 Spotlight Deterrence (Default Off) To access Spotlight Deterrence, from the home screen, tap (• •), select Device Details > Spotlight > Alarm Linkage White Light *Repeat for each camera. Note: with Alarm Linkage White Light on, the spotlight will flash. Siren Deterrence (Default Off) To access Night Vision, from the home screen, tap (•...
- Page 16 Setting Up Night Vision To access Night Vision, from the home screen, tap (• •), select Device Details > Night Vision > Night Vision Mode *Repeat for each camera. Night Vision Modes Smart Night Vision When motion is detected, the spotlight will turn on to trigger color night vision.
-
Page 17: Setting Up More
Setting Up More To access More, from the home screen, tap (• •), select Device Details and tap More Status LED Turn on/off the LED indicator light Image Rotation Rotates camera feed by 180°. Recommended if the camera is installed upside down. How to Share Device Access Tap the “+”... - Page 18 “Next” “Done” to complete the setup. Tip: Each user will need to download the Defender Guard app and create their own account before sharing access. Need Help? Visit DefenderCameras.com/support...
-
Page 19: Frequently Asked Questions
How many Guard/Guard Pro cameras can I connect to the Defender Guard App? You can connect a total of 16 cameras to the Defender Guard App and view up to 4 cameras at once. We recommend no more than 6 Guard/Guard Pro cameras be connected in the same home/building to avoid interference issues. - Page 20 DEFENDER is not responsible or liable in any way for any damage, vandalism, theft ® or any other action that may occur while a DEFENDER product is in use by the ® purchaser. We reserve the right to change models, configuration, or specifications without notice or liability.
Need help?
Do you have a question about the Guard Pro and is the answer not in the manual?
Questions and answers