Table of Contents
Advertisement
Question 5
CS ID
Question 6
Channel#
Question 7
HS Ant. Tst (Y/N)
Question 8
AC Loss RPT (Y/N)
Question 9
USE RADIO # (Y/N)
nd
Question 10
2
Question 11
REVIEW?
Enter the primary central station's system ID number, 1-7F
Enter the AlarmNet channel number, 1-14
Press Y for 135 second interval antenna test. Press N if no antenna
test is desired.
If AC LOSS RPT is answered yes (Y), the radio will report the loss of
AC voltage within a 10 to 40 minute window, from its detection. If
this feature is disabled (N), this message will be suppressed. NOTE:
In either case, low battery messages will be sent as detected.
If Y is selected, the Radio ID number will replace the panel Subscriber
ID in panel-generated messages.
If N is selected, the radio will send panel-generated messages with the
panel Subscriber ID number.
This must be programmed with a value, even if it is the same as the
CS ID
primary central station. The control panel has the option to send a
selected message to the second central station.
Press "Y" to review the programming options and to ensure that the
correct responses have been made. Parameters can be changed during
review. Press "N" to end programming session.
– 24 –
Advertisement
Table of Contents
