Creating Discs From Recovery Files On A Network - Gateway MX6452 User Manual

CHAPTER 3: Recovering Your System

Creating discs from recovery files on a network

Important
If you are recording to
CDs, make sure that
they are CD-R and not
CD-RW discs. If you are
recording to DVDs,
make sure that they
are DVD-R or DVD+R
discs, not DVD-RW or
DVD+RW discs.
Important
Use the correct type of
blank disc for the
recovery (ISO) file. For
example, if the
recovery (ISO) file was
created for a DVD,
make sure you use a
blank DVD+R or
DVD-R disc.
40
Before you continue, make sure that your
computer has a recordable drive.
To create recovery discs from recovery files
stored on a network:
Make sure that you have blank discs ready.
1
If the ISO filenames start with CD, you will
need blank CDs. If the ISO filenames start
with DVD, you will need blank DVDs.
Insert a blank disc into the recordable drive
2
of any networked computer. You need one
blank disc for each recovery (ISO) file.
Click Start, then click My Computer.
3
Open the network location of the recovery
4
files.
Double-click the file for the first disc. Your
5
media burning software opens.
Follow the on-screen instructions of your
6
media burning software to complete the
burning of the recovery disc(s).