Gateway MT6451 Service Manual page 72

9
10
11
12
13
14
15
16
17
18
19
20
68
Replacing Notebook Components
Remove the palm rest by following the instructions in
Remove the two hex nuts that secure the external video board to the notebook.
Remove the two screws that secure the external video board to the notebook.
Screw
Screw
Install the new external video board into the notebook, then replace the screws removed
in Step 11.
Replace the two hex nuts removed in
Replace the palm rest by following the instructions in
Replace the LCD panel assembly onto the notebook by following the instructions in
"Replacing the LCD panel assembly" on page
Replace the keyboard by following the instructions in
Replace the keyboard cover by following the instructions in
on page 29.
Replace the hard drive kit by following the instructions in
page 26.
Replace the DVD drive by following the instructions in
page 11.
Plug the antenna cables into the IEEE 802.11 wireless card, then replace the wireless bay
cover.
"Replacing the palm rest" on page
Hex nuts
Step 10.
"Replacing the palm rest" on page
38.
"Replacing the keyboard" on page
"Replacing the keyboard cover"
"Replacing the hard drive" on
"Replacing the DVD drive" on
56.
56.
31.