Technaxx TX-103 User Manual page 17

Playback controls
 To pause playback, press the PLAY/PAUSE (▶‖) button once to
halt playing. Press it again to continue playback.
 To play the previous track, press ◀◀ once or hold down
continuously to rapidly progress through previous tracks.
 To play the next track, press ▶▶ once or hold down continuously to
rapidly advance through tracks.
 To delete a file on your media storage device, while in playback
mode, press and hold the REC/DEL button until the "DEL" LED light
flashes along with "dL" on the display. Then press REC/ DEL again
and the "DEL" LED will flash rapidly and the file will be deleted.
 To delete a file on your media storage device: While in STOP
mode, select the track by pressing ▶▶ or ◀◀ , press and hold the
REC/DEL button until the "DEL" LED light flashes along with "dL" on
the display. Then press the REC/DEL again and the "DEL" LED will
flash rapidly and the file will be deleted.
 To stop playback of the music track, press the ■/USB/SD button.
Recording onto a USB flash drive/SD Card
This equipment has the capacity to encode your traditional music
media (vinyl records, cassette tapes or CDs via AUX IN) into digital
format and record it onto a USB device or SD card as MP3 file(s).
 Insert a storage device (USB or SD card) into the relevant slot.
 Get your traditional music media ready for playback: Either place
a record on the turntable, insert a cassette tape into the cassette slot,
insert a CD into a CD player or connect a different recording medium
to the AUX IN socket.
 Set the function switch to the appropriate function: PHONO, CD or
AUX.
NOTE: If you are recording via Cassette, make sure an AUX IN
cable is not connected to AUX socket.
 Press the REC button to start recording. "rE" will appear on the
display screen and the "REC" LED will illuminate. A few seconds
later the "REC" LED will start flashing and recording will begin.
17