Technaxx TX-103 User Manual page 11

 Set the auto/manual stop control: Set the Auto Stop switch to ON
to stop the turntable turning when the record is finished. If the switch
is set to OFF, the turntable will continue turning.
 Remove the stylus guard and unlock the tone arm lock.
 Push the lift lever up to raise the tone arm and then gently move
the tone arm to the desired position over the record.
1 = Clamper
The platter will begin to spin when the Tone Arm is moved toward
the record. Push the Lift Lever forward to lower the Tone Arm slowly
onto the desired position on the record. The record will begin
playing.
 If the auto switch is turned to ON, the record will stop playing
automatically. If it is set to OFF, the record will not stop automatically.
 When the record is finished, push the Lift Lever backwards to
raise the Tone Arm and gently move it back to its rest position.
 When you have finished playing records, engage the Tone Arm
lock to protect it from accidental movement. Press the Power button
to switch the unit OFF. Unplug it from the power supply if it is not
going to be used for a while.
NOTE: Should your record stop before the last track finishes, set the
Stop switch to OFF. Your record will now play to the end, but you will
have to stop the turntable rotation manually.
11