Technaxx TX-103 User Manual page 14

 Printable discs are not recommended for use with this unit as the
label side may be sticky and damage the unit.  Do not use
protective coating spray on the discs.  Do not write on discs with
ball point or hard tipped pens. Only use oil-based felt tipped pens. 
Do not use stabilizers. Using commercially available CD stabilizers
may cause damage to this unit.  Do not use CD‟s with an irregular
shape as they may damage the Unit.
 If you have any doubts about the care and handling of a disc, read
the precautions supplied with the disc, or contact the manufacturer
directly.
Playing a CD
 Turn the unit ON by pressing the Power button. Set the function
knob (PHONO/CD/AUX/RADIO) to CD.
 "- -" will blink for a few seconds. When no disc is loaded "no" will
appear on the display screen.
 Place a disc on the tray with the printed label facing up.
 Do not place more than one disc in the tray at a time.
 The disc must be placed in the centre of the disc tray. If the disc is
not properly inserted, it may not be possible to get the disc out once
it has closed.
14