Connecting To The Port Replicator - Gateway M275 User Manual

Connecting to the port replicator

You can attach your convertible tablet PC to the port replicator while your
convertible tablet PC is off, on, or in Standby mode.
Attaching to the port replicator
To attach your convertible tablet PC to the port replicator:
1
Make sure the docking release latch is in the fully raised position.
2
Align the connector holes on the bottom of your convertible tablet PC with
the docking posts on the port replicator.
3
Press down on the docking release latch until your convertible tablet PC
moves into place, docking with the port replicator.
4
Connect external devices to the ports on the port replicator.
Important
6
Your convertible tablet PC may detect additional devices
and add drivers after being attached to the port replicator.
This process must be completed for components to work
correctly. Follow any on-screen instructions, if necessary.
www.gateway.com