Page 2
*Please Keep For Future Reference Only. NOBU SERIES ASSEMBLY INSTRUCTION Dimensions Width : 1200mm Depth : 400mm Height : 730mm NB SB1247-OK SIDEBOARD IMPORTANT :- PLEASE READ THESE INSTRUCTION CAREFULLY BEFORE STARTING ASSEMBLY. NB SB1247-OK / PAGE 1...
Page 3
IMPORTANT TIPS AND MAINTENANCE iii)To avoid dulling, do not iv)Never use ammonia cleaning i)Keep children and animal away ii)Never put the liquid or damp place directly to the sunlight. product, because it will damage from working area because smaller on the furniture. to finish.
Page 4
COMPONENTS :- Please check you have all the panels are listed below. PANELS PART LIST 4pcs PILLAR LEG_L 2pcs 13 DRAWER SIDE_R 2pcs 4pcs PILLAR LEG_R 14 DRAWER FRONT 2pcs LEG SUPPORT_F&B 4pcs 15 DRAWER BASE 2pcs 4pcs LEG SUPPORT_L&R 16 DR BS SUPPORT RAIL BOTTOM PANEL SIDE PANEL_L...
Page 7
STEP 5 ARROW ON LOCKING HARDWARE NEEDED: NUT MUST POINT 4PCS TOWARDS HOLE IN EDGE OF PANEL 8PCS 2PCS 2PCS Upper Second Hole Last Third Hole First Hole SCREW MUST BE INSERTED IN THE FIRST HOLE ON THE DRAWER RUNNER STEP 6 HARDWARE NEEDED: 4PCS...
Page 8
STEP 7 HARDWARE NEEDED: ARROW ON LOCKING NUT MUST POINT 4PCS TOWARDS HOLE IN 14PCS EDGE OF PANEL 2PCS 4PCS FRONT Upper Second Hole First Hole Last Third Hole SCREW MUST BE INSERTED IN THE FIRST HOLE ON THE BACK DRAWER RUNNER Upper Second Hole Last Third Hole...
STEP 15 HARDWARE NEEDED: 8PCS ARROW ON LOCKING 4PCS NUT MUST POINT TOWARDS HOLE IN EDGE OF PANEL DRAWER X 4 STEP 16 HARDWARE NEEDED: 8PCS ARROW ON LOCKING 4PCS NUT MUST POINT TOWARDS HOLE IN EDGE OF PANEL DRAWER X 4 NB SB1247-OK / PAGE 11...
Need help?
Do you have a question about the NOBU Series and is the answer not in the manual?
Questions and answers