Download Print this page
eliving FURNITURE NOBU Series Assembly Instruction Manual

eliving FURNITURE NOBU Series Assembly Instruction Manual

Advertisement

Quick Links

i)Keep children and animal away
from working area because smaller
part could choke if swallowed.
v)Use a soft or damp cloth (dry
cloth)and then wipe to clean on
the surface.
COMPONENTS :-
HARDWARE
NO.
FITTINGS/TOOLS
A.
DOWEL 6x30MM
B.
BOLT M7x60MM
C.
SCREW M3.5x12MM
D.
SCREW M4x38MM
E.
SCREW M4x25MM
F.
M6X50MM
G.
HANDLE
H.
CAM BOLT+CAM NUT
IMPORTANT TIPS AND MAINTENANCE
ii)Never put the liquid or damp
on the furniture.
vi)Two person are required.
Please check you have all the fittings part or tools are listed in below.
QTY
NO.
FITTINGS/TOOLS
64
I.
Pcs
PVC GLIDE
4
J.
Pcs
SCREW M3.5x16MM
64
K.
Pcs
DRAWER RUNNER A-L/R
8
L.
Pcs
DRAWER RUNNER B - L/R
16
M.
Pcs
ALLEN KEY
10
N.
Pcs
SPANNER
8
O.
Pcs
PLASTIC CORNER BLOCK
20
P.
Sets
iii)To avoid dulling, do not
place directly to the sunlight.
QTY
NO.
4
Q.
Pcs
24
R.
Pcs
8
S.
Pcs
8
T.
Pcs
1
U.
Pc
1
V.
Pc
8
Sets
1
Pc
PVC H
iv)Never use ammonia cleaning
product, because it will damage
to finish.
vii)Put the soft map on the
floor to protect the furniture
before assembly.
FITTINGS/TOOLS
FLANGE NUT
SCREW M4 X 30MM
Anti-Tip Strap
M4 X 16MM
M4 X 25MM
PVC WALL PLUG
NB TB8411-OK / PAGE 2
QTY
4
Pcs
8
Pcs
2
Pcs
2
Pcs
2
Pcs
2
Pcs

Advertisement

loading
Need help?

Need help?

Do you have a question about the NOBU Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for eliving FURNITURE NOBU Series

  • Page 1 IMPORTANT TIPS AND MAINTENANCE iii)To avoid dulling, do not iv)Never use ammonia cleaning i)Keep children and animal away ii)Never put the liquid or damp place directly to the sunlight. product, because it will damage from working area because smaller on the furniture. to finish.
  • Page 2 *Please Keep For Future Reference Only. NOBU SERIES ASSEMBLY INSTRUCTION Dimensions Width : 800mm Depth : 400mm Height : 1095mm NB TB8411-OK TALLBOY IMPORTANT :- PLEASE READ THESE INSTRUCTION CAREFULLY BEFORE STARTING ASSEMBLY. NB TB8411-OK / PAGE 1...
  • Page 3 COMPONENTS :- Please check you have all the panels are listed below. PANELS PART LIST PILLAR LEG_L 2pcs 4pcs DRAWER SIDE_L 2pcs 4pcs PILLAR LEG_R DRAWER SIDE_R SUPPORT LEG_F&B 2pcs 4pcs 15 DRAWER FRONT SUPPORT LEG_L&R 2pcs 4pcs 16 DRAWER BASE 4pcs BOTTOM PANEL DW BASE S.
  • Page 4 STEP 1 HARDWARE NEEDED: 4PCS STEP 2 HARDWARE NEEDED: 12PCS NB TB8411-OK / PAGE 4...
  • Page 5 STEP 3 HARDWARE NEEDED: 8PCS STEP 4 HARDWARE NEEDED: 4PCS 4PCS NB TB8411-OK / PAGE 5...
  • Page 6 STEP 5 HARDWARE NEEDED: 4PCS 16PCS 2SETS ARROW ON LOCKING NUT MUST POINT 4PCS TOWARDS HOLE IN EDGE OF PANEL Upper Second Hole Last Third Hole First Hole SCREW MUST BE INSERTED IN THE FIRST HOLE ON THE DRAWER RUNNER STEP 6 HARDWARE NEEDED: 4PCS...
  • Page 7 STEP 7 HARDWARE NEEDED: 4PCS 16PCS 2SETS 4PCS ARROW ON LOCKING NUT MUST POINT TOWARDS HOLE IN EDGE OF PANEL Upper Second Hole First Hole Last Third Hole SCREW MUST BE INSERTED IN THE FIRST HOLE ON THE DRAWER RUNNER STEP 8 HARDWARE NEEDED: 4PCS...
  • Page 8 STEP 9 HARDWARE NEEDED: 4PCS ROUND EDGE FACING UP STEP 10 HARDWARE NEEDED: 6PCS NB TB8411-OK / PAGE 8...
  • Page 9 STEP 11 HARDWARE NEEDED: STEP 12 NB TB8411-OK / PAGE 9...
  • Page 10 STEP 13 HARDWARE NEEDED: 8SETS STEP 14 HARDWARE NEEDED: 16PCS DRAWER X 4 NB TB8411-OK / PAGE 10...
  • Page 11: Table Of Contents

    STEP 15 HARDWARE NEEDED: 8PCS ARROW ON LOCKING NUT MUST POINT 4PCS TOWARDS HOLE IN EDGE OF PANEL DRAWER X 4 STEP 16 HARDWARE NEEDED: 8PCS ARROW ON LOCKING 4PCS NUT MUST POINT TOWARDS HOLE IN EDGE OF PANEL DRAWER X 4 NB TB8411-OK / PAGE 11...
  • Page 12: Hardware Needed

    STEP 17 HARDWARE NEEDED: 12PCS DRAWER X 4 STEP 18 HARDWARE NEEDED: 8PCS FINISHED FRONT EDGE DRAWER X 4 NB TB8411-OK / PAGE 12...
  • Page 13 STEP 19 DRAWER X 4 STEP 20 HARDWARE NEEDED: 32PCS DRAWER X 4 NB TB8411-OK / PAGE 13...
  • Page 14: 4Pcs

    STEP 21 HARDWARE NEEDED: 24PCS 8PCS LAST THIRD HOLE DRAWER X 4 THIRD HOLE STEP 22 HARDWARE NEEDED: 8PCS DRAWER X 4 NB TB8411-OK / PAGE 14...
  • Page 15 STEP 23 HARDWARE NEEDED: 16PCS 8PCS DRAWER X 4 STEP 24 NB TB8411-OK / PAGE 15...
  • Page 16 Wall Wall HARDWARE LIST (U) M4 X 25MM - 2pcs (S) Anti-Tip Strap- 2pcs (T) M4 X 16MM - 2pcs (V)PVC Wall Plug- 2pcs WARNING Serious or fatal injuries can occur from furniture tipping over. To prevent the furniture from tipping over we recommend that it is pertmanently fixed to the wall.

This manual is also suitable for:

Nb tb8411-ok tallboy