Table of Contents
Advertisement
Client error information: ixx
Yellow screen :
Alternative operation
Non-blocking message: reduced
functionality
Touching the screen anywhere
will clear the message
Message on the screen
i31 : Electronics overheating: Temperature
reduced to 180°C
i33 : Core probe non function or not plugged
E46 : Electronic communication fault (Bus
RS485)
E53
:
Motor short-circuit or ventilation non
function
E61 : Ambient probe short circuit
E62 : Ambient probe non function
E67 : Gas safety activated
E68 : Cavity at +290°C
E72 : Electronics at over + 75°C
i81 : Water flow rate too low
E82 : Solenoid sticking
USB stick full
USB missing
13.1 INFORMATION ABOUT STAINLESS STEELS
Stainless steel is a steel grade designed that a thin protective sheet is formed on the metallic surface, which protects it against corrosion
(Oxide film resulting from the chemical reaction of oxygen on the metallic surface).
Anything hindering the formation of this sheet, or facilitating its partial destruction (Food residues, overflow of liquids, stagnant liquids...)
reduces the resistance of stainless steel to corrosion.
Whilst the composition of stainless steel enables it to withstand some chemical aggression better than classical steels, you must not think
that stainless steel is indestructible.
3 main factors contributing to corrosion should be watched for:
- The chemical environment in general:
- The temperature:
- The duration:
Page 26
12. ERROR MESSAGES
Red screen :
Cooking stopped (pause)
Blocking message
Cooking stops
Consequences
Cooking continues automatically at a
temperature below 180°C
Cooking stops
Cooking stops
Cooking stops
Cooking stops
Cooking stops
Cooking stops
Cooking stops
Cooking stops
Cooking continues.
A cleaning cycle stops (Paused)
Cooking continues.
USB stick is full.
USB stick required
13. MAINTENANCE
* Different brines (Salt concentration, Sauerkraut...)
* Chlorides contained in particular in:
Any chemical environment is made considerably more aggressive to stainless
steel as the temperature rises.
The longer the contact time between stainless steel and the chemicals, the more
noticeable the consequences of corrosion will be.
After sales error information: Exx
Yellow screen :
Alternative operation
Non-blocking message: reduced
functionality
Touching the screen anywhere
will clear the message
Clean the lower and rear air intakes. If the
problem persists, call a service technician.
To continue cooking connect a probe or switch
to timer mode.
Possible to launch safe mode: convection mode at
175°C (see guidance and info about the control
screen).
Switch the oven off and call a service technician.
Switch the oven off and call a service technician.
Switch the oven off and call a service technician.
Check gas inlet. Switch the oven off and call a
service technician.
Switch the oven off and call a service technician.
Switch the oven off and call a service technician.
Check the valve and water pressure.
Switch the oven off and call a service technician.
Switch the oven off and call a service technician.
Clear the USB stick
Connect a USB stick
- cleaning products
- bleach.
3EE490044EU – 09/19
Red screen :
Cooking stopped (pause)
Blocking message
Cooking stops
What to do?
ELRO-Werke AG
Wohlerstrasse 47
5620 Bremgarten
Advertisement
Table of Contents
