Page 1
COMBI OVENS PRECIJET+ GAS & ELECTRIC MANUFACTURERS INSTRUCTIONS Part C: Operating manual - WARRANTY - To ensure the guarantee on this equipment, you should comply with the MANUFACTURER’S INSTRUCTIONS in this manual. However if you cannot undertake the required maintenance operations, our installation and service network is available to provide you with a personalized contract.
GUIDANCE AND INFO ABOUT THE CONTROL SCREEN ..................22 USB PORT SOCKET / CORE PROBE SOCKET ....................24 TOOLS FOR OPTIMAL COOKING ........................24 11.1 CORE PROBE ..................................24 11.2 LOW TEMPERATURE COOKING ............................25 ERROR MESSAGES .............................. 26 ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
Page 3
MAINTENANCE OF INTERNAL SURFACES ........................28 14.5 MATERIAL USED FOR COOKING CORROSIVE PRODUCTS ..................29 14.6 UNLOCKING THE ROTATING DUCT ..........................29 LES CONSUMABLES ............................30 15.1 CLEANING PRODUCT ................................ 30 PREVENTATIVE MAINTENANCE ......................... 30 GUARANTEE ................................. 31 ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
- Always put the protective cover in place (lowered to protect connections) whenever the socket is not in use. - Never “clean” connections with a water hose or a sponge. (If the silicone cover is used and put back in place after use, no maintenance is necessary). ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
Page 5
- Wear appropriate protective clothing, gloves and face and eye protective gear. - In the event of an accident or sickness seek immediate medical attention - Dispose of the product and its container as hazardous waste. ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
Double glazed door (unlocked from the inside) Control panel Door handle Sheet duct USB port / Core probe socket Access door Data plate (visible with the door open) Door channel Oven legs height adjustable ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
Always ensure the module is securely locked in place during transport) - Position the trolley in front of the oven and release the catch - Push the module onto the rolling frame. To remove it reverse these instructions ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
83 / 67 IMPORTANT: The number of levels used for the product to be cooked, as well as the number of portions to be placed on a given level should comply with the following rules. ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
* ROASTS: Use gastronorm containers for meat preparations in sauces or for braising…. For roasting, cook the products directly on the grills (chicken, roast beef, sausages….). In this case place a gastronorm container (20mm deep) on the bottom level to catch the cooking juices. ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
This function is active by default but may be deactivated within the client parameters The “padlock” icon indicates whether the screen is locked or not. To unlock the screen press the coder or slide the padlock to the right ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
The cycle start button will flash in yellow and the countdown will run from « -7:30 » to « 00:00 » until the selected cooking starts (this can still be changed). NOTE: if an automatic wash cycle has been programmed this will not take place ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
Recipe displayed by list or photos 6.2 FAVOURITE RECIPE To add a favourite recipe: select a recipe from the factory or clients list, then press a free space for 3 seconds Free space Delete a favourite recipe ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
2 criteria allow the recipe to be adapted to the clients taste (e.g.: +/- browned, blue or well done) without the need to create a new recipe … or to know what to modify (Time, Temperature, which phase …) ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
HACCP ON/OFF: Records HACCP data (for approx. 1 year) and frequency of data capture Oven identifier: individual for each oven if there are several ovens on site. USB (or Radio) information exchange viewable on the oven ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
Capacity in litres of the water treatment system. Reset. Set to zero by default (if the oven doesn’t have a dedicated water treatment system Software reset (Attention: All recorded information is erased from memory: HACCP data….) ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
After renewal of the system reset the counter as above. 7.5 QUICK GUIDE Graphic demonstration and or animated of the main menus Information and « tips and advice » most used ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
The time for each is indicated on the left. - Check the pipes are connected to the chemical containers and that the quantities are sufficient. If not refer to the paragraph “Replacing the chemical containers” - Press to select: "Back". ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
Changing the detergent containers Use the « Priming Cleaner» functions when changing the chemical container if the supply tube is empty. For example when you start the unit for the first time. ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
There is an automatic standby mode, timing is set in the « Client » parameters, this controls the ovens principle functions (blank screen, lighting). Can the welcome message be personalised? The welcome message can be changed in Client parameters. The message can be associated with a photo from the gallery or a welcome logo. ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
Page 24
Switch the oven off and back on, then open and closed the door 3 times within 10 secs. The light will go off every time the door is opened and flash 3 times on the third closure to indicate the start of a Safe Mode cycle. How do you stop “Safe Mode”? To stop a Safe Mode cycle, switch the oven off. ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
Red meats Very rare rare Just done Well done White meat Veal Poultry Fish Salmon – Tuna White fleshed fish Pork preparations – terrines NOTE: Recommendation for controlling the core temperature (cooking degree): ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
210°C 70°C till 60°C till For 15 min Core T° = 38°C Core T° = 52°C White meats 210°C 90°C to 85°C till For 15 min Core T° = 60°C Core T° = 73°C ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
Any chemical environment is made considerably more aggressive to stainless steel as the temperature rises. - The duration: The longer the contact time between stainless steel and the chemicals, the more noticeable the consequences of corrosion will be. ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
Do not leave fittings such as hood filters, aluminium trays or dishes soaking in tanks, tanks, pots, fryers etc. Just one night is sufficient to etch stainless steel at the point of contact with aluminium. ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
CLEANING, DEGREASING: Once a day (see section « Cleaning menu ») DESCALING: Every day if necessary. If there are any mineral deposits (whitish specks) as a result of un-softened water in the cooking chamber this must be removed daily. ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
The materials used intensively and regularly for cooking corrosive products, such as sea fish, sauerkraut, …, should be cleaned carefully and systematically after each use. 14.6 UNLOCKING THE ROTATING DUCT (on 6 and 10 level gas ovens, 10 GN2/1 and 20 level ovens) Procedure - Lift the handle. - Pull the duct outwards. ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
Rinse thoroughly. In case of damage, alert the after-sales service Visual inspection of the core probe (tip, cable, In case of damage, alert the after-sales service passage through the bulkhead) Periodic maintenance by the after-sales service ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
(this is important for three-phase motors, fan direction, electric rams,...) will under no circumstances be covered by warranty. For this reason we advise against connecting appliances until the electrical and gas supplies can be checked and compared with details on the data plate. ELRO-Werke AG Wohlerstrasse 47 5620 Bremgarten...
Need help?
Do you have a question about the PRECIJET+ and is the answer not in the manual?
Questions and answers