Table of Contents
Advertisement
Warning: A FastPAD USB stick should be used for data exchange consumptions, recipes, HACCP, photos or update...
Using a USB stick that is not recognized can lead to crashes or bugs.
7.3
CLIENT PARAMETERS
Activation and adjustment of the automatic pre-heat
when the oven is switched on.
Adjust the screen brightness and end of cycle buzzer
volume
Adjust the time and temperature in holding mode
(operating as a hot cupboard in Manual mode)
Activation of pre-heat function before cooking
Page 17
Choice of temperature display units
Enter the cost of energy, chemicals and water to calculate consumption costs. First press
activates the cost area. The value can be change slowly with the knob. Second press
displays the keyboard to enter a value directly.
After being exported to USB stick HACCP data prior to this number of weeks is deleted.
Restarts a cycle automatically if the is a power cut 9if set to YES).
Option of cooling condensate
Default volume of detergent container
Capacity in litres of the water treatment system. Reset. Set to zero by default (if the oven
doesn't have a dedicated water treatment system
Software reset (Attention: All recorded information is erased from memory: HACCP
data....)
Cooling the cooking cavity with or without water (by
air)
Choice of humidity level for food regeneration
Choice of default mode displayed when first started
Activate the screen saver (blacks out) after the selected
time. Not when a cycle is running.
Recipes displayed by family group (yes) or alphabetically
(no)
Choice of manufacturer's recipes displays:
Fr = French / En = English
3EE490044EU – 09/19
ELRO-Werke AG
Wohlerstrasse 47
5620 Bremgarten
Advertisement
Table of Contents
