Cleaning/Maintenance - Leupold GX-3c Operating Instructions Manual

3) Press and release MODE until "bEEP" is displayed .
4) While the word "bEEP" is displayed press and release POWER
as necessary until the word "OFF" is displayed . Press MODE
to save the changes .
NOTE: Prism Lock only works in Scan Mode while pressing and
holding the POWER button.

CLEANING/MAINTENANCE

Blow away dust or debris on lenses, or use a soft lens brush
(such as the one found on the Leupold LensPen) . To remove
fingerprints, water spots or tougher dirt, use a soft cotton cloth
or the cleaning end of the Leupold LensPen . A lens tissue with
lens cleaning fluid may be used for more stubborn dirt . Always
apply cleaning fluid to the cleaning cloth, never directly to the
lenses . To insert a new battery, remove the battery cover (shown
in diagram on page 8) and remove the exhausted battery . Insert
a new CR-2 battery, negative terminal first, into the battery
compartment . Close battery cover .
All GX rangefinders are waterproof .
All GX rangefinders include a lanyard and are equipped with a
lanyard attachment for added security on the course .
26