Advertisement
Installation of PCO cameras
pco.panda 4.2
First, check the install manual from PCO. There you find a detailed description of the installation procedure.
https://www.pco.de/support/manuals/scmos-cameras/pcopanda-42/
Quick Install
tl;dr the manual
1.
Download the latest USB interface driver from the PCO homepage
https://www.pco.de/support/interface/scmos-cameras/pcopanda-42/
2.
Install the USB driver
3.
Download the latest Camware software from the PCO homepage
https://www.pco.de/support/software/scmos-cameras/pcopanda-42/
4.
Connect the camera via USB and check if Camware can find the sCMOS camera.
pco.pixelfly
First, check the install manual from PCO. There you find a detailed description of the installation procedure.
https://www.pco.de/support/manuals/specialized-cameras/pcopixelfly-usb/
Quick Install
tl;dr the manual
1.
Download the latest USB interface driver from the PCO homepage
https://www.pco.de/support/interface/specialized-cameras/pcopixelfly-usb/
2.
Install the USB driver
3.
Download the latest Camware software from the PCO homepage
https://www.pco.de/support/software/specialized-cameras/pcopixelfly-usb/
4.
Connect the camera via USB and check if Camware can find the sCMOS camera.
Document version: 1.0
Auer, August 2018
Advertisement
Table of Contents
Related Manuals for Pco pco.panda 4.2
Summary of Contents for Pco pco.panda 4.2
- Page 1 Installation of PCO cameras pco.panda 4.2 First, check the install manual from PCO. There you find a detailed description of the installation procedure. https://www.pco.de/support/manuals/scmos-cameras/pcopanda-42/ Quick Install tl;dr the manual Download the latest USB interface driver from the PCO homepage https://www.pco.de/support/interface/scmos-cameras/pcopanda-42/...
- Page 2 Troubleshooting If Micro-Manager does not find the PCO camera, try opening the PCO camware software and check if the camera can be found. If PCO camware connects to the camera, try Micro-Manager again. In some cases this solves connection problems.
- Page 3 Installation of Toptica's TOPAS software Connect the USB stick provided from Toptica Install TOPAS iBeam smart software Connect the Laser via USB Open TOPAS Click Menu Connect The laser should now be ready Document version: 1.0 Auer, August 2018...
- Page 4 Installation of Picasso Go to the Jungmann lab homepage https://www.biochem.mpg.de/5608779/Software Download the Picasso Installer Install Picasso Document version: 1.0 Auer, August 2018...
Need help?
Do you have a question about the pco.panda 4.2 and is the answer not in the manual?
Questions and answers