Climate Control System - Honda Civic 2022 Manual

Climate Control System

Using Automatic Climate Control
The automatic climate control system maintains the interior temperature you select.
The system also selects the proper mix of heated
the interior temperature to your preference as quickly as possible.
Use the system when the engine is running.
1. Press the AUTO button.
2. Adjust the interior temperature using the temperature control dial.
3. Press the (on/off) button to cancel.
Models with SYNC button and MAX COOL button
Passenger's Side Temperature Control
a
Dial *1
Fan Control Dial
b
Driver's Side Temperature Control Dial
c
MAX COOL Button
d
AUTO Button *1
e
ON/OFF Button
f
A/C (Air Conditioning) Button
g
SYNC Button *1
h
Recirculation Button
i
*1:Right-hand drive types shown. For the left-hand drive types, these buttons are
located at the symmetrically opposite to the right-hand drive type.
* Not available on all models
238
* or cooled air that raises or lowers
MODE Button
j
• Air flows from dashboard vents
• Air flows from dashboard and
*1
floor vents
*1
• Air flows from floor vents
•
windscreen demister vents
*1
*1
*1
Air flows from floor and
1Using Automatic Climate Control
If any buttons are pressed while using the climate
control system in auto, the function of the button
that was pressed will take priority.
The AUTO indicator will go off, but functions
unrelated to the button that were pressed will be
controlled automatically.
To prevent cold air from blowing in from outside, the
fan may not start immediately when the AUTO
button is pressed.
Models without MAX COOL button
If the interior is very warm, you can cool it down
more rapidly by partially opening the windows,
turning the system on auto, and setting the
temperature to low. Change the fresh air mode to
recirculation mode until the temperature cools down.
Models with MAX COOL button
If the interior is very warm, you can cool it down
more rapidly by partially opening the windows, press
the MAX COOL button.
Models with heater core
When you set the temperature to the lower or upper
limit, Lo or Hi is displayed.
Models without heater core
When you set the temperature to the lower or upper
limit, Lo or 28 is displayed.