Faucet Installation; Supply Connections - Kohler Fairfax K-12183 Installation Manual

Escutcheon
Stud
Apply
Supply Inlet
Plumbers
Putty
Lavatory
Bracket
Washer
Nut

1. Faucet Installation

Apply plumbers putty or other sealant to the underside of the
escutcheon according to the manufacturer's instructions.
Feed the faucet supply inlets through the lavatory hole and
position the faucet and escutcheon. Slide the bracket and washer
over the stud and tighten the nut securely to the stud.

2. Supply Connections

If the lavatory is not installed, install it at this time. Follow the
lavatory manufacturer's instructions.
Identify your supply connection type.
Connect the supply tubes to the faucet supplies and supply stops.
(Left is hot - right is cold.)
Wrench-tighten all connections.
Kohler Co.
Supply Inlet
Stop Supply
3 1011034-2-B