Download Print this page

MadgeTech QuadState Product Information Card

Advertisement

Quick Links

Part Number
QuadState
Input Range
0 to 12VDC continuous; (0 to 30VDC peak)
Input Low
Input High
Internal Weak Pull-Up
Recommended Duty Cycle for
Inputs Greater Than 12VDC
(over 1 minute interval)
Resolution
Channels
Memory
Sample Rate
LED Indicator
Required Interface Package
Baud Rate
Typical Battery Life
Operating Environment
-20 to +60°C, 0 to 95%RH (non–condensing)
Material
Dimensions
3.5" x 4.4" x 1.0"
(89mm x 112mm x 26mm)
Approvals
Battery Warning
WARNING: FIRE, EXPLOSION, AND SEVERE BURN HAZARD. DO NOT SHORT CIRCUIT, CHARGE,
FORCE OVER DISCHARGE, DISASSEMBLE, CRUSH, PENETRATE OR INCINERATE. BATTERY MAY
LEAK OR EXPLODE IF HEATED ABOVE 60°C (140°F).
1.800.544.2843
OctState
<0.4V
>2.7V
<500µA
18V: <50%
24V: <25%
30V: <10%
1 second
4
8
52,428 states
1 second to 12 hours
None
IFC110 or IFC200
2,400
1 year
Anodized aluminum
3.5" x 4.4" x 1.5"
(89mm x 112mm x 39mm)
-
www.calcert.com
10
15
20
5
25
0
30
Product Information Card
QuadState
4-Channel State Data Logger
OctState
8-Channel State Data Logger
sales@calcert.com
QuadState and OctState
Red 485
Dark Blue Pantone 289
Light Blue 58% of Pantone 289

Advertisement

loading

Summary of Contents for MadgeTech QuadState

  • Page 1 Product Information Card Part Number QuadState OctState QuadState and OctState Input Range 0 to 12VDC continuous; (0 to 30VDC peak) Input Low <0.4V Input High >2.7V Internal Weak Pull-Up <500µA Recommended Duty Cycle for 18V: <50% Inputs Greater Than 12VDC 24V: <25%...
  • Page 2 3/32” HEX Driver (Allen Key) Replacement Battery (U9VL-J) Please refer to the app note “Engineering Units”, found on the MadgeTech website, for - Remove the cover from the device by unscrewing the four screws. information on how to manage Engineering Units. Also view the Engineering Units Video - Remove the battery from its compartment and unsnap it from the connector.

This manual is also suitable for:

Octstate