Related Manuals for MadgeTech QuadRTDTempV2
Summary of Contents for MadgeTech QuadRTDTempV2
- Page 1 Product User Guide QuadRTDTempV2 and OctRTDTempV2 QuadRTDTempV2 4-Channel, 100 Ω RTD Based Temperature Data Logger OctRTDTempV2 8-Channel, 100 Ω RTD Based Temperature Data Logger To view the full MadgeTech product line, visit our website at madgetech.com.
-
Page 2: Table Of Contents
QuadRTDTempV2 and OctRTDTempV2 Quick Start Steps ........... 1 Additional Features & Operation ....2-3 Product Maintenance ........3 Recalibration ..........3 General Specifications ........4 Support ........Back Cover To view the full MadgeTech product line, visit our website at madgetech.com. -
Page 3: Quadrtdtempv2 And Octrtdtempv2
Insert the Software USB Stick in an open USB port. If the autorun does not appear, locate the drive on the computer and double click on Autorun.exe. Follow the instructions provided in the Wizard. Install the MadgeTech 4 Software and USB Drivers onto a Windows PC. -
Page 4: Additional Features & Operation
Warning: Note the polarity instructions. Do not attach wires to the wrong terminals. 100 Ω, 2 or 4 wire RTD probes are recommended for the most accurate performance. Most 100 Ω, 3 wire RTD probes will work, but MadgeTech cannot guarantee the accuracy. -
Page 5: Product Maintenance
Prices and specifications subject to change. See MadgeTech’s terms and conditions at To send devices to MadgeTech for calibration, service or repair, please use the MadgeTech RMA Process by visiting madgetech.com, then under the services tab, select RMA Process. -
Page 6: General Specifications
BATTERY MAY LEAK, FLAME OR EXPLODE IF DISASSEMBLED, SHORTED, CHARGED, CONNECTED TOGETHER, MIXED WITH USED OR OTHER BATTERIES, EXPOSED TO FIRE OR HIGH TEMPERATURE. DISCARD USED BATTERY PROMPTLY. KEEP OUT OF REACH OF CHILDREN. Specifications subject to change. See MadgeTech’s terms and conditions at madgetech.com... - Page 7 If possible, try switching the battery with a new 9V lithium. • Ensure that no other MadgeTech software (such as MadgeTech 2) is running in the background. • Ensure that the Connected Devices panel is large enough to display devices. This can be verified by positioning the cursor on the edge of the Connected Devices panel until the resize cursor appears, then dragging the edge of the panel to resize it.