Configuring The Tcp/Ip Protocol - Gateway 9310 User Manual

Configuring the TCP/IP protocol

A networking protocol is a language computers use to talk to each other. One of several
available protocols must be set up on each computer you plan to use on your network.
We recommend you use the Transmission Control Protocol/Internet Protocol (TCP/IP),
which is widely accepted and compatible for local area networks (LANs), as well as for
Internet communications.
When networking is set up in Windows XP, TCP/IP is automatically installed as the default
protocol.
Terms you should know
DHCP - Dynamic Host Configuration Protocol (DHCP) lets a router temporarily assign an
IP address to a computer on the network.
IP Address - Internet Protocol (IP) address is a number that uniquely identifies a computer
on the network.
Subnet Mask - Subnet mask is a number that identifies what subnetwork the computer
is located on. This number will be the same on all computers on a home network.
Using a DHCP server
In order to use the TCP/IP protocol on each computer with a router or access point router,
you must set the protocol to "Obtain an IP address from a DHCP server."
To use a DHCP server
1
Click , then click
Start
Panel is in Category View, click
Internet Connections window opens.
2
Click/Double-click
. The Control Panel window opens. If your Control
Control Panel
Network and Internet Connections
. The Network Connections window opens.
Network Connections
www.gateway.com
Creating an Ethernet network
. The Network and
91