Advertisement
Advertisement
Table of Contents
Related Manuals for O'jump 699
Summary of Contents for O'jump 699
- Page 1 N°296 BUCK Ref. : 699 (UK) Assembly Instructions 18/01/2021...
- Page 2 Thank you for buying this product O'jump. We advise you to read the assembly instructions carefully. The apparatus is presented in pre-assembled parts for a simplified assembly. We have designed this O'jump product to bring you complete satisfaction. If you need help, the O'jump team is at your disposal to accompany you .
- Page 3 Tools needed to assemble the apparatus. 14/18/19 Hardware listing (pre-assembled) Ø8 Quick link M12 Turnbuckle lantern eye-eye M12 lifting ring Chain with 20 links Ø8 length 50 cm Indexing knob 18/01/2021...
- Page 4 List of parts (pre-assembled) Legs Groudn anchoring system Body 18/01/2021...
- Page 5 Height adjustment View A by transparency Unscrew and pull the indexing knob to release the slide. Slide up or down the foot. Release the knob in front of the desired position. Lock the knob by tightening. Repeat for all four feet. Warning : Safety is always the main consideration when setting up an apparatus.
- Page 6 Assembling the anchoring system to the ground To increase the stability, the buck is delivered with a ground anchring system. Place the body directly above the anchor point. Tighten the lantern tensioner locknuts with a wrench. 18/19 Tightening torque of the links 3Nm. 18/01/2021...
- Page 7 Ground anchor Material required : A bubble level A drill Anchors adapted to Screws adapted to Wrench adapted to Pencil your support your support your type of screws Check with the O’JUMP service specifying the nature of your support. The type of plugs and screws depending on whether your floor is concrete, wooden floor, flexible ground...
- Page 8 Drill all the holes using a drill bit appropriate for your floor. Place the fixations in the holes. They should not be higher than the ground. Put in place an anchor ring (not supplied). 18/01/2021...
Need help?
Do you have a question about the 699 and is the answer not in the manual?
Questions and answers