Troubleshooting Guide; Service Information - Black & Decker 4V MAX BD40 Manual

TROUBLESHOOTING GUIDE

BE SURE TO FOLLOW SAFETY RULES AND INSTRUCTIONS
PROBLEM POSSIBLE CAUSE
Unit will not start. Battery pack not charged.
Internal componets too hot.
Brushes worn out.
Battery pack will Tool not connected to the charger.
not charge.
Charger not plugged in.
Surrounding air temperature too hot or too
cold.
Unit shuts off Battery pack has reached its maximum
abruptly. thermal limit.
Out of charge. (To maximize the life of the
battery pack it is designed to shut off abruptly
when the charge is depleted.)

SERVICE INFORMATION

BLACK+DECKER offers a full network of company-owned and authorized service locations. All BLACK+DECKER Service
Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. For more
information about our authorized service centers and if you need technical advice, repair, or genuine factory replacement
parts, contact the BLACK+DECKER location nearest you, or visit us at www.blackanddecker-la.com.
POSSIBLE SOLUTION
Check battery pack charging requirements.
Allow tool to cool down.
Have brushes replaced by an authorized
BLACK+DECKER service center.
Connect tool to the charger.
Plug charger into a working outlet. Refer to
"Important charging notes" for more details.
Move charger and tool to a surrounding air
temperature of above 40 degrees F (4,5 °C) or
below 105 degrees F (+40,5 °C).
Allow battery pack to cool down.
Place on charger and allow to charge.
ENGLISH
11 11