SUSPENZ Big Catch 55-0130 Quick Start Manual

CATCH
BIG

Assembly

Tools Needed: Adjustable Wrench for Lock Nuts

Attach U-Brace to bottom of each side of frame as shown>

Work Stations
Open both
shown above to hold one boat.

Verify that velcro on slings is firmly closed.

Adjust stand spacing to best achieve a stable platform
for your watercraft.

When not in use, fold by lifting up on the top of both
yellow crossbars.

Use of the Sling


When the stand is folded, the sling should look like the
photo. The loops of the sling that wrap around the foam
on the frame are angled towards the center.
For Technical assistance or Replacement parts: call 866.787.7369
Rev. 6/20
Suspenz®, Inc.
8725 Roswell Road #0-220
Atlanta GA 30350
Work Station
Holds up to 350 lbs.
and place them in line as
-----—->
Model # 55-0130

Parts List

Qty Name
2 Work Station Frame
4 U-Brace
16 Stainless Steel Allen Head Bolt
16 Stainless Steel Lock Nut
1 Allen Head Wrench
Over for Page 2
Customer Service:770-518-0045
Fax: 770-518-8507
Website: www.suspenz.com