iRobot Roomba j7+ Owner's Manual page 13

Washing the Bin
Important: Do not wash the
filter. Remove the filter before
EN EN
washing the bin.
1
Release the bin, remove the
filter, and open the bin door.
2
Rinse the bin using
warm water.
Note: Bin is not dishwasher safe.
3
Make sure bin is completely
dry. Reinsert filter and place
bin back in the robot.
8 For more information, visit global.irobot.com
Cleaning the Edge-Sweeping Brush
1
Use a coin or small screwdriver to
remove the screw holding the Edge-
Sweeping Brush in place.
2
Pull to remove the Edge-Sweeping
Brush. Remove any hair or debris, then
reinstall the brush.
Cleaning the Front Caster Wheel
1
Pull firmly on the front wheel module to remove it
from the robot.
2
Pull firmly on the wheel to remove it from its
housing (see illustration below).
3
Remove any debris from inside the wheel cavity.
4
Reinstall all parts when finished.
Make sure the wheel clicks back into place.
Housing
Important: A front wheel clogged with hair and debris
could result in damage to your floor. If the wheel is not
spinning freely after you have cleaned it, please contact
Customer Care.
Axle Wheel