Usb Interface Troubleshooting - Garmin Nuvi 350 User Manual

a
PPendix

USB Interface Troubleshooting

Problem/Question
How do I know my unit
is in USB Mass Storage
Mode?
My computer does not
sense that the unit is
connected.
I cannot find any drives
named "nuvi" in my list
of drives.
I keep getting a message
saying "Unsafe Removal
of Device" when I unplug
the USB cable.
Garmin © 2007
When your unit is in USB Mass Storage Mode, a picture of a Honda
Portable Navigation System connected to a computer is shown. Also,
you should see a new removable disk drive listed in My Computer
(Windows) or a new volume (drive) on your desktop (Mac).
1. Unplug the USB cable from your computer.
2. Turn the unit off and then back on again.
3. Plug the USB cable into your computer. The unit automatically
turns on and goes into USB Mass Storage Mode.
Try the solution listed above.
If you have several network drives mapped on your computer,
Windows may have trouble assigning drive letters to your nuvi drives.
Follow the steps on the
Verify that your computer has the latest updates installed. If not,
update your computer, and then connect the unit.
Windows users, double-click the
system tray. Select "USB Mass Storage Device" and click Stop. Select
the nuvi drives and click OK. You can unplug your unit from your
computer now.
Mac users, drag the volume icon to the
changes to an Eject
Solution/Answer
following page to assign your drive letters.
Unplug or Eject
Trash
icon.
0
icon in your
. The Trash icon
Honda Portable Navigation System