Customizing The Unit Settings; Time Settings; Position Format Settings - Garmin GPSMAP 62STC Owner's Manual

Customizing Your Device
Adding a Page
1. From the main menu, select Setup
> Page Sequence.
2. Select Add Page.
3. Select a page to add.
Removing a Page
1. From the main menu, select Setup
> Page Sequence.
2. Select a page.
3. Select Remove.
4. Press ENTER.
Customizing the Unit
Settings
You can customize units of measure for
distance and speed, elevation, depth,
temperature, and pressure.
1. From the main menu, select Setup
> units.
2. Select a setting.
3. Select a unit for the setting.
34
4. Repeat steps 2–3 for each setting
you want to customize.

Time Settings

From the main menu, select Setup >
Time.
• Time Format—allows you to
select a 12-hour or a 24-hour
display time.
• Time Zone—allows you to select
the time zone for the device. You
can select Automatic to set the
time zone automatically based on
your GPS position.

Position Format Settings

NOTE: Do not change the position
format or the map datum coordinate
system unless you are using a map or
chart that specifies a different position
format.
From the main menu, select Setup >
Position Format.
GPSMAP 62 Series Owner's Manual