Calibration Setup - Garmin GPSMAP 60CSx Owner's Manual

NOTE: Unless you have a working knowledge
of Headings and North Referencing, it is
recommended that you use the default values.
To access the Heading Setup Page:
On the Setup Menu Page, highlight the
Heading icon, and press ENTER.
Display—select the value (Cardinal Letters, Degrees,
or Mils) to show your heading.
North Reference—provides headings based on a true
north reference.
Switch to compass heading when below (for more
than)—Select speed and time delay for electronic
compass switching. See page 15.
GPSMAP 60CSx Owner's Manual

Calibration Setup

The Calibration Setup Page allows you to calibrate
both the Compass and Altimeter for increased
accuracy in navigation.
To calibrate the compass:
1. On the Setup Menu Page, highlight the
Calibration icon, and press ENTER. The
"Which sensor would you like to calibrate?"
message appears.
2. Highlight the Compass button, and press
ENTER to open the Compass Calibration
Page. Follow instructions on page 16.
To calibrate the Altimeter:
Select Altimeter and press ENTER to display
the Altimeter Calibration Page and follow
instructions on pages 25 and 68.
M M >
AIN ENU
75