Leveling Your Refrigerator - Insignia NS-CF49BMSS2 Manual

Place the refrigerator door on the middle hinge and tape it into place, then
12
install the upper hinge and hinge cover on the upper left side of the
refrigerator, and the screw hole cover on the upper right side of the
refrigerator.
Upper hinge
cover
Upper hinge
Untape the doors, then try both doors to make sure that they move freely.
13
Note: Make sure that the rubber gaskets make a good seal with the refrigerator all the way
around the doors before tightening the hinge screws.

Leveling your refrigerator

Your refrigerator must be level in order to function correctly. If your refrigerator is
not leveled during installation, the door may not close or seal correctly, causing
cooling, frost, or moisture problems.
• Rotate the leveling foot clockwise (to raise) your refrigerator or
counterclockwise (to lower).
Leveling foot
Raise
Note: To make it easier to adjust the foot, have someone push against the top of your
refrigerator to tilt it slightly.
14
Lower
www.insigniaproducts.com
Screw hole
cover