Power Board; Connector Repair - HP E27m G4 Maintenance And Service Manual

Power board

The power board part number is
PLPCLH511AQA1
Before removing the power board, follow these steps:
▲ Prepare the monitor for disassembly. See Preparation for disassembly on page 14.
Remove the power board:
1) The HP E24m G4 power board connector position is as follows:
CN801
2) Locate the part number location on the board

Connector repair

This procedure includes HDMI, DisplayPort, USB Type-C, RJ45 and USB3.0 connectors.
PLPCLH351IQA3
(2 source).
nd
(1 st source) or
CN910
Warning:
After unplugging the
power supply, the capacitance
is still charged, do not touch
and discharge the capacitor.
17