Garmin GPS 500 Quick Reference page 10

NavCom Page / Annunciators & Messages
NAVCOM Page
Frequency
Category
Usage Restriction
Information
The NAVCOM page provides a list of the airport communication
and navigation frequencies at your departure, enroute and arrival
airports.
To Select a Frequency List for a Departure, Enroute or
Arrival Airport
1. Press the small right knob to activate the cursor.
2. Rotate the large right knob to place the cursor on the airport identifier
field (top line on the NAVCOM page).
3. Rotate the small right knob to select the desired airport and press ENT.
To Scroll Through the List of Frequencies
1. Activate the cursor, if not already active, by pressing the small right
knob.
2. Rotate the large right knob to move the cursor through the list of
frequencies. If there are more frequencies in the list than can be displayed
on the screen, a scroll bar along the right-hand side of the screen will
indicate which part of the list is currently being displayed.
10
Bottom Row Annunciators and Messages
Departure, Enroute
or Arrival Airport
Scroll Bar
Assigned
Frequency
CDI/RAIM Mode: Approach (APR),
Terminal (TERM), or Enroute (ENR)
Integrity Failure (INTEG) or Position
Warning (WARN) Annunciator
(RAIM protection limit failure)
OBS Mode: Suspend
(SUSP), OBS or blank (for
auto-sequencing)
Message Annunciator:
Flashing (new message),
On, or blank (no message)
Page Annunciator (NAV/WPT/AUX/
NRST/FPL/VNAV/PROC), Waypoint
Alert ("NEXT DTK"), Turn Advisory
("TURN TO"), etc.