Default Nav Page - Garmin GPS 500 Quick Reference

Default NAV Page

Active Leg of
Flight Plan, or
Direct-to Destination
To/From
Flag
The following symbols are used directly above the graphic CDI to
depict the "active leg" of a flight plan or direct-to:
Course to a Waypoint, or Desired Course between Two Waypoints
Direct-To a Waypoint
Left Procedure Turn
DME Arc to the Left
Left-Hand Holding Pattern
To Quickly Display the Default NAV Page
1. From any page, press and hold CLR for approximately two seconds.
8
Default Nav Page
User-selectable
Data Fields
(all four corners)
Course Deviation
Indicator (CDI)
Vectors-To-Final
Right Procedure Turn
DME Arc to the Right
Right-Hand Holding Pattern
To Select a Different Data Item for any Data Field
1. With the Default NAV page displayed,
press the MENU key to display an options
menu.
2. Rotate the large right knob to
highlight the "Change Fields?" option, and
press ENT to select this option.
3. Use the large right knob to highlight
the data field you wish to change.
4. Rotate the small right knob to display
a list of available data items. Continue
rotating the small right knob to select
the desired data item from the list.
5. Press ENT to select the desired data item
and return to the Default NAV page.
6. Press the small right knob to remove
the cursor from the page.