Table of Contents
Advertisement
Downrod (continued)
www.HunterFan.com
1.888.830.1326
3/8"
8"
KEEP!
Tighten the setscrew
with pliers. DO NOT
HAND TIGHTEN.
Remove the pre-installed
The wires can be cut, but
Hand tighten the downrod (at
WARNING
setscrew so that the downrod
leave at least 8" extending
least 4-5 full turns) until it stops.
can be inserted.
from the top of the downrod.
FAN FALL HAZARD
To prevent SERIOUS INJURY or DEATH:
8"
3/8"
• ALWAYS tighten setscrew with pliers.
• DO NOT hand tighten setscrew.
• CHECK the setscrew is tight using pliers
8
each time you change fan direction.
M0075-01 • 01/07/19 • © 2019 Hunter Fan Company
Advertisement
Table of Contents
