Hunter Bridgeport Outdoor Manual page 10

Wiring
Green/Yellow
Stripe
Refer to CAUTION c.1 on pg. 2
Note: To connect the wires, hold the bare metal
leads together and place a wire connector over
them, then twist clockwise until tight.
Using an orange wire
connector from
the hardware bag,
connect the 3 grounding
wires (green, green/
yellow stripe, or bare
copper) coming from the
ceiling, downrod, and
hanging bracket.
WARNING
All wiring must be in accordance with
national and local electrical codes ANSI/NFPA
70. If you are unfamiliar with wiring or in
doubt, consult a qualified electrician.
10
M0075-01 • 01/07/19 • © 2019 Hunter Fan Company
www.HunterFan.com
the
the black wire (ungrounded)
(grounded) from the ceiling to
Turn the splices upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one side of
the outlet box and the ungrounded wires on the other side of the outlet box.
1.888.830.1326
Using the orange wire
connectors from
hardware bag, connect
from the ceiling to the black
and the blue wires from the
fan. Connect the white wire
the white wire from the fan.