Table of Contents
Advertisement
1. Introduction
1.3. Certifications and approvals
1.3
Certifications and approvals
Hazardous location certifications
Refer to product label for applicable approvals.
Approval / Item
cCSAus Explosion Proof
with IS outputs
ATEX Flameproof with IS
outputs
IEC Ex Flameproof with
IS outputs
Enclosure Type
Class II and III installations and for Type 4X/IP66 applications require that all cable and unused entries be
sealed with a Zone 1 certified seal fitting. Seal fittings are supplied by Honeywell.
Radio certifications
Agency
Federal
Communications
Commission (FCC)
Industry Canada (IC)
2
OneWireless XYR 6000 Wireless Valve Position Sensor Quick Start Guide
Ratings / Description
Class I, Division 1, Groups A, B, C & D
Class II, Division 1, Groups E, F & G
Class III
II 2 G Ex d [ia] IIB T4
II 2 D Ex tD A21 IP66 T85C
Ex d [ia] IIB T4: DIP A21 IP66 T85C
Types 1, 3, 4, 4X, 6, 6P, 13 and IP66/67
Certification
DSSS FCC ID:
S5750025034
DSSS IC ID:
573I-50025034
Description
The WCX Series Valve Position Sensors comply with part 15
of the FCC rules. Operation is subject to the following two
conditions.
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
The installer of this radio equipment must ensure that the
antenna is located or pointed such that it does not emit RF
fields in excess of Health Canada limits for the general
population; consult Safety Code 6, obtainable from Health
Canada's web site www.hc-sc.gc.ca/rpb
Revision 1
1/20/09
Advertisement
Table of Contents
