Table of Contents
Advertisement
MAINTENANCE AND CLEANING
WARNING
Do not use steam cleaning equipment.
•
Before cleaning, make sure the cooking zones are switched off and that the residual heat indicator ("H") is not
•
displayed.
Important:
•
Do not use abrasive sponges or scouring pads as they may damage
the glass.
•
After each use, clean the hob (when it is cool) to remove any
deposits and stains from food residue.
•
Sugar or foods with a high sugar content can damage the hob and
must be immediately removed.
•
Salt, sugar and sand could scratch the glass surface.
•
Use a soft cloth, absorbent kitchen paper or a special hob cleaner
(follow the Manufacturer's instructions).
•
Spills of liquid in the cooking zones can cause the pots to move or
vibrate.
•
After cleaning the hob, dry thoroughly.
TROUBLESHOOTING
•
Check that the electricity supply has not been shut off.
•
If you are unable to turn the hob off after using it, disconnect it from
the power supply.
•
Induction hobs may produce hissing or crackling noises during
normal operation. These noises may vary depending on the pot
and pan used and the amount of food that these contain, and do
not indicate any type of defect.
Error code
C81, C82
The control panel switches o because
of excessively high temperatures.
F02, F04
The connection voltage is wrong.
F01, F06, F12, F13, F25,
Disconnect the hob from the power supply. Wait a few seconds then reconnect the hob to the power supply.
F34, F35, F36, F37, F41,
If the problem persists, call the service centre and specify the error code that appears on the display.
F47, F58, F61, F76
SOUNDS PRODUCED DURING OPERATION
Induction hobs may whistle or creak during normal operation.
These noises actually come from the cookware and are linked to the
characteristics of the pan bottoms (for example, when the bottoms are
made from different layers of material or are irregular).
Description
If the iXelium ™ logo appears on the glass, the hob has been treated
with iXelium ™ technology, an exclusive Whirlpool finish which ensures
perfect cleaning results, as well as keeping the surface of the hob shiny
for longer.
To clean iXelium ™ hobs, follow these recommendations:
•
Use a soft cloth (microfibre is best) dampened with water or with
everyday glass cleaning detergent.
•
For best results, leave a wet cloth on the glass hob surface for a few
minutes.
Please note: The presence of water, liquid spilled from pots or any objects
resting on any of the hob buttons can accidentally activate or deactivate
the control panel lock function.
Possible causes
The internal temperature of
electronic parts is too high.
The sensor detects a discrepancy
between the appliance voltage and
that of the mains supply.
These noises may vary according to the type of cookware used and to
the amount of food it contains and are not the symptom of something
wrong.
Solution
Wait for the hob to cool down before
using it again.
Disconnect the hob from the mains
and check the electrical connection.
Advertisement
Table of Contents
