If the Keyless Remote Battery is Weak
If the beeper sounds, the To Start, Hold Remote Near Start Button message
appears on the driver information interface, the POWER button flashes, the READY
indicator does not come on. Turn on the power system as follows:
1. Touch the centre of the POWER button
with the H logo on the keyless remote while
the POWER button is flashing. The buttons
on the keyless remote should be facing you.
u
The POWER button flashes for about 30
seconds.
2. Depress the brake pedal and press the
POWER button within 10 seconds after the
beeper sounds and the POWER button
changes from flashing to on.
u
If you don't depress the pedal, the mode
will change to ACCESSORY.
uuPower System Won't StartuIf the Keyless Remote Battery is Weak
391