Honda CITY Hybrid 2021 Manual page 289

uuHonda Sensing * uRoad Departure Mitigation System
■
Road Departure Mitigation system On and Off
Safety Support Switch
Left Selector Wheel
* Not available on all models
288
When you turn the Road Departure Mitigation
system on and off, do the following.
1. Press the safety support switch.
2. Roll the left selector wheel to the
symbol and push it.
u The message appears on the driver
information interface when the system
becomes on or off.
u A tick appears in the box and the colour
of the symbol changes green when
the system is on. The tick disappears and
the colour of the symbol changes
gray when the system is off.
1Road Departure Mitigation system On and Off
You can also select the safety support content from
the driver information interface.
2 Driver Information Interface P. 111
When you have selected Warning Only from the
customized options using the driver information
interface, the system does not operate the steering
wheel and braking.
2 Settings P. 123
The adaptive cruise control (ACC) (amber), vehicle
stability assist (VSA) system, vehicle stability assist
(VSA) OFF, safety support indicators (amber) and low
tyre pressure/deflation warning system indicator
may come on after reconnecting the 12-volt battery.
Drive a short distance at more than 20 km/h. The
indicator should go off. If it does not, have your
vehicle checked by a dealer.
*