Honda CITY Hybrid 2021 Manual page 396

■
What to Do After the Engine Starts
Once your vehicle's engine has started, remove the jumper cables in the following
order.
1. Disconnect the jumper cable from your vehicle's ground.
2. Disconnect the other end of the jumper cable from the booster battery -
terminal.
3. Disconnect the jumper cable from your vehicle's 12-volt battery + terminal.
4. Disconnect the other end of the jumper cable from the booster battery +
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
* Not available on all models
uuIf the 12-Volt Battery Is DeaduJump Starting Procedure
1If the 12-Volt Battery Is Dead
The adaptive cruise control (ACC)
stability assist (VSA) system, vehicle stability assist
(VSA) OFF, safety support *
tyre pressure/deflation warning system indicator
may come on after reconnecting the 12-volt battery.
Drive a short distance at more than 20 km/h. Each
indicator should go off. If it does not, have your
vehicle checked by a dealer.
* (amber), vehicle
indicators (amber) and low
*
395