If the Keyless Remote Battery is Weak
If the beeper sounds, the To Start, Hold Remote Near Start Button message
appears on the driver information interface, the ENGINE START/STOP button
flashes, and the engine won't start, start the engine as follows:
1. Press the ENGINE START/STOP button.
The beeper sounds and the ENGINE
u
START/STOP button flashes for about
30 seconds.
2. Touch the centre of the ENGINE START/
STOP button with the H logo on the keyless
remote while the ENGINE START/STOP
button is flashing. The buttons on the
keyless remote should be facing you.
u
The beeper sounds, and the ENGINE
START/STOP button stays on for about
10 seconds.
3. Depress the brake pedal and press the
ENGINE START/STOP button while the
ENGINE START/STOP button is on.
u
The engine starts.
u
If you don't depress the pedal, the mode
will change to ACCESSORY.
uuEngine Does Not StartuIf the Keyless Remote Battery is Weak
563