Honda CITY Hybrid 2021 Manual page 174

■
Manual switching between high-beam and low-beam
Except Indian models
If you want to manually switch the headlights between high beam and low beam,
follow either of the procedures below. Note that when you do this, the auto high-
beam indicator will turn off and the auto high-beam will be deactivated.
Using the lever:
Pull the lever towards you for flashing the high beams then release it or push the
lever forward to the high beam position.
u To reactivate the auto high-beam, follow either of the procedures below and
the auto high-beam indicator will come on.
• Pull the lever towards you and hold it over two seconds then release it.
• Turn the light switch to
position.
Using the light switch:
Turn the light switch to .
u To reactivate the auto high-beam, turn the light switch to AUTO when the
lever is in the low beam position, the auto high-beam indicator will come on.
Indian models
If you want to manually switch the headlights between high beam and low beam,
follow the procedure below. Note that when you do this, the auto high-beam
indicator will turn off and the auto high-beam will be deactivated.
Using the light switch:
Turn the light switch to .
To reactivate the auto high-beam, turn the light switch to AUTO when the
u
lever is in the low beam position, the auto high-beam indicator will come on.
and then to AUTO when the lever is in the low beam
uuOperating the Switches Around the Steering WheeluAuto High-Beam *
173